| The guide number is 328 as per the model designation. It bounces, zooms and swivels. The flash comes complete with a bracket. This unit is compatible with all digital cameras with either built-in flash capability or not. It has a hot shoe so that it can be fired from the camera too. It is fully synchronized with fill-in flash and red-eye reduction flash and can be used with virtually all of the digital cameras on the market. It works as a slave. It can be set for a single flash camera or a pre-flash camera, or, it can detect which setting is best.
Off-camera flash" refers to setups where the flash is not directly attached to the camera's hot-shoe. The benefits of such a setup is that the lens-flash distance can be greater, and thus more natural look can be achieved, the probability of "red eyes" is reduced, and more than one flash units can be used. In this document I will briefly cover three of the most common methods for operating flash units off-camera.
Ordinary flash units will not work because your digital camera lacks a way to connect and/or mount an external flash. Even more importantly, most digital cameras emit a “pre- flash” and/or a ‘red-eye” pulse that fire before the shutter opens, then an additional flash pulse is fired to actually light your picture. This “pre-flash” (“double-flash”) and/or “red-eye” pulse confuses other flash and slave units , causing them to go off at the wrong time, and are useless for your digital camera. The Slave Flash has special digital pulse counting slave circuitry that is not fooled by the “pre-flash” and eliminates the need for an electrical connection to your camera. A three-position switch sets the flash to ignore one or two “pre-flashes”, or none at all.
Specifications:
Brand: PHOENIX
Guide # ( 50mm @ ISO 100 ) :92
Auto : ISO 100 f/ stop 2.8 in " S " Position
Auto Distance Range : Approx. 3.3´ - 38´ ( ISO 100 - " S " Position )
Mode Selector Switch : ( 3 Positions ) - N, S1 & S2
Zoom Range ( 4 Positions ): W1 28mm - W2 35mm - S 50mm - T 85mm
Slave : Yes
Bounce Angle : 0° - 90°
Swivel Angle : 0°- 330
Angle Of Coverage : Horizontal 60° , Vertical 45°
Ready Light : Yes
Flash Duration : (sec.) 1/1,000 - 1/20,000
Color Temperature : 5600° k
Power Source : 4AA Batteries Or NiCad Equivalent Or NiMH
Recycling Time : 6 sec. ( With Alkaline Batteries ), NiCad / NiMH 4 sec. Approx.
X-Synch Voltage : ‹ Or = 6V
Dimensions : L 2.75” x H 5.25” x W 1.9”
Weight (w/o batteries) : 7.4 oz.
Package Contents - Phoenix D92-BZS Digital Slave Flash
- Mounting Bracket With Accessory Hot Shoe
- Operating Instructions
- Mini Tripod
- One-Year USA Warranty from Pheonix Worldwide
- BRAND NEW IN ORIGINAL BOX AND FULLY SEALED
- Digital Innovations is an Authorized Phoenix Dealer
 Follow These Instructions For Best Results
This Flash comes fully complete with a Hot Shoe And Can Be Attached Directly To Your Digital Camera's Accessory Hot Shoe.This Flash is unique because It Will Operate As A Slave Unit Next To Your Digital Camera.However If Your Digital Camera Does Not Have A Built-in Flash, Then do the following,
Either Mount The Flash On The Accessory Shoe Of The Mounting Bracket (which is supplied) And then Attach Next To Your Digital Still Camera By Tightening The Knob, Or Simply Mount The Flash On The Mini Tripod (which is supplied as well) or Place On Any Flat Surface. |
